info@laboscience.com 
| Ion measurement range | Cd range: 1×106– 1M, 0.01-11200 ppm |
| Ion measurement accuracy | ± 1 % F.S. |
| Resolution | 0.001, 0.01, 0.1, 1 |
| Calibration points | 2 to 5 points |
| Calibration solutions | 0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol / L, mg / L |
| mV range | (-1999.9) to 1999.9 mV |
| mV accuracy | ± 0.2 mV |
| mV resolution | 0.1 mV |
| Temperature measurement range | 0 to 105 °C, 32 to 221 °F |
| Temperature accuracy | ± 0.5 °C, ± 0.9 °F |
| Temperature resolution | 0.1°C |
| Temperature compensation | 0 to 100 °C, 32 to 212 °F |
| Compensation mode | Manual or automatic |
| Data hold function | Manual or automatic endpoint detection |
| Reset function | Yes |
| Stability condition | Low or high |
| Calibration due | 0 to 31 days |
| Power off | Manual or automatic (10,20,30 minutes) |
| Memory | Stores up to 500 sets of data |
| Output | USB communication interface |
| Connector | BNC |
| Display | LCD (130 × 110 mm) |
| Power | DC 5 V, using AC adapter, AC 220 V / 50 Hz |
| Dimension (L × W × H) | 210 × 188 × 60 mm |
| Weight | 1.5 kg |
- Large LCD display
- 2 - 5 points calibration from low to high concentration
- Direct ion concentration readout for elaborate measurement process
- Selectable concentration units from ppm, mg / L, mol / L
- mV measurements to check the performance of ion selective electrode
- Temperature compensation provides accurate reading over the entire range
- Stability indicator to show current measurement status
- Calibration due reminder for regular calibration of the meter
- Auto hold function to freeze stable reading for better viewing & recording
- Automatic electrode diagnosis shows the slope of the sensor
- Reset setting function
- Expanded memory stores and recalls up to 500 readings
- Built –in real time clock stamps
- USB communication interface to transfer stored data to PC
Benchtop Ion meter is used to measure the cadmium ion concentration present in potable water, D/W water, waste water and natural water resources using different ion concentration electrodes.
Cd Ion selective electrode
Temperature probe
Standard solution (1000 ppm)
Ionic strength adjuster (30 mL)
USB cable
DC 5 V Power adapter
Ion selective electrode: Cd range: 1×106– 1M, 0.01-11200 ppm
Ion standard solutions: 480 mL / bottle
Ionic strength adjuster: 480 mL / bottle
Temperature probe with sensor
