 |
|
Benchtop Dissolved oxygen meter LBDO-A10
https://laboscience.com/ | info@laboscience.com
Benchtop Dissolved oxygen meter LBDO-A10 is equipped with polarographic sensor to measure the dissolved oxygen content. The manual salinity & barometric pressure compensation helps in accurate measurement of dissolved oxygen. The system menu of dissolved oxygen meter can set 6 parameters which includes the number of calibration points, temperature units etc.
| Dissolved oxygen range | 0.0 to 20.0 mg / L (or ppm) |
|---|---|
| Dissolved oxygen accuracy | ± 0.5 mg / L |
| Resolution | 0.1 mg / L |
| Calibration points | 1 - 2 points |
| Sensor type | Polarographic DO probe |
| Temperature compensation range | 0 to 40 °C, 32 to 104 °F |
| Barometric pressure correction | 60.0 to 112.5 kPa, 450 to 850 mmHg |
| Salinity correction | 0 - 35 g / L |
| % of saturation of oxygen range | 0.0 to 200.0 % |
| % of saturation of oxygen accuracy | ± 10 % F.S. |
| % of saturation of oxygen resolution | 0.001 |
| System menu | Allows setting of 6 parameters |
| Data hold function | Manual or automatic endpoint detection |
| Power off | Manual or automatic (180 minutes) |
| Reset function | Yes |
| Display | Backlit LCD (135 × 75 mm) |
| Connector | 6 pin mini plug |
| Power | DC 9 V, use of SC adapter, AC 220 V / 50 Hz |
| Dimension (L × W × H) | 210 × 205 × 75 mm |
| Weight | 1.5 kg |
Applications:Benchtop dissolved oxygen meter has applications in water & waste water management industry, environmental monitoring, surface ground water, research & development, education to detect content of dissolved oxygen. |
Standard Accessories:Dissolved oxygen probe |
Optional Accessories:Polarographic sensor |
Copyright ©2023 Laboscience.com All Rights Reserved