info@laboscience.com 
| Scale | Density [g/cm³] |
| Measurement range | 0.0001 to 99.9999 g/cm3 |
| Density resolution | 0.0001 g/cm |
| Maximum weight | 120 g |
| Minimum weight | 0.001 |
| Temperature range | RT to 100°C (Density value) |
| Ambient temperature | 10 to 40 °C |
| Measurement time | About 5 seconds |
| Output mode | RS232 interface |
| Power supply | AC 220 V / 50 Hz |
| Dimension (L × W × H) | 330 × 180 × 350 mm |
| Weight | 4.5kg |
- Digital LCD display shows function concentration, density and BAUME
- Measures density value of samples with temperature ranging from normal to 100℃
- Convenient and accurate sample analysis
- Shows percentage composition of mixed samples
- Liquids are measured quickly and with accuracy
- Equipped with function of solution compensation
- Can set actual water temperature value
- Function of setting aerostatic buoyancy and the bound of density
- Adopts special high standard accessories like transparent injection mould tank (resist wear, fall off and corrosion)
- Easy to clean unit, easy to handle, requires less time
Density meter is widely used in petroleum laboratories, pharmaceutical laboratories, chemical industries etc. Also used in scientific academies, researching key laboratories, quality inspection units etc. to identify the sample and its quality, to measure the concentration in binary mixtures.
| Accessories no. | Accessories name |
| 1 | Host |
| 2 | Testing board |
| 3 | tank |
| 4 | tweezers |
| 5 | thermometer |
| 6 | power transformer |
| Accessories no. | Accessories name |
| 1 | Printer |
| 2 | Anti-corrosive liquid measurement assembly |
